Валерон, глюкалка.. Повезет/не повезет.
На видео куча урродов носятся по встречке.
====
This is weird...
When I turned on the ignition for the first time, the screen started to flicker and the unit reset itself. Then it would work again, until I’d rev the engine, when it would flicker and reset itself again. Assuming it was the power supply/voltage issue, I unplugged the power cables completely so it ran only on battery and the only two leads going into the unit were the cameras. But no luck - again with screen flickering and resetting.
I tried to move the camera cables around inside the bike, especially trying to avoid any other wiring, especially anything to do with the ignition. It was only after several tries and placing the cables around the airbox (as far away from any other wiring), that I got it to behave normally. I’ve let Innovv know about the issue and they said that they will keep an eye out for the problem.
However, it’s been running reliably fine ever since.
===
------------------------------------------****** Личка не работает, пишите на емэйл. ******